FBMC – An Ever-Promising Candidate for 5G Technologies and Beyond

Navigating the Data-Driven Era

As mobile devices become primary conduits for data-intensive tasks such as online streaming and high-quality image sharing, the volume of data being transmitted continues to surge. The high-speed and real-time data transmission required for videos demands fast and reliable communication technologies. As the technology makes it available, new frequency bands are being opened for commercial usage in the GHz bandwidth. Experimental devices and hardware are being developed to enable such activities. Furthermore, communication standards are evolving to support these needs.

New technologies and techniques are being researched and evaluated that can support such extreme requirements. A wide variety of cutting-edge technologies is being incorporated, such as massive multiple input-multiple output (MIMO) and beamforming with numerous antennas, polar codes, low-density parity check (LDPC) codes for error correction in the transmitted bitstream, and special multicarrier modulation techniques for the physical layer of analog transmission. The biggest challenge is to have simple and energy-efficient algorithms operating on the mobile user side for longer battery life. In contrast, more complex systems can be deployed at the base station in relation to a large number of antennas and a higher signal processing load.

In 4G communication systems, orthogonal frequency division multiplexing (OFDM) has served as a primary modulation technique. It is easy to apply, and the corresponding signal processing is straightforward. Signal generation can be easily performed using the Fast Fourier Transform (FFT), and the corresponding demodulation can be executed in the receiver using the Inverse FFT (IFFT). Furthermore, an easy subcarrier-based equalization can be performed to compensate for the effects of multipath propagation in the radio channel. Only its spectral properties remain less than optimal in accordance with a strict spectral mask. In 5G and 6G communication standards, OFDM is facing constant challenges from other modulation schemes.

Filter Bank Multicarrier Modulation

One such technique is Filter Bank Multicarrier Modulation (FBMC), which I believe is a very promising solution. It has a very narrow spectral mask, which is essential for spectrally localized communications. However, there are still outstanding questions related to FBMC applications. For one, compared to OFDM, it requires an extra load of signal processing, which needs to be addressed in order to implement it on FPGA or ASIC hardware. Meanwhile, sensitivity to nonlinear distortions can easily destroy the unique and advantageous spectral properties of an FBMC transmit signal. Furthermore, receivers need to be carefully designed, and radio channel equalization methods are still an open issue.

Despite those issues, FBMC modulation exhibits the best spectral performance as it implements a prototype filter (PF) per sub-carrier, which is well localized both in the time- and frequency domains. The exclusion of the CP enables it to fully exploit the available bandwidth while maintaining the data rate. In this paper, we consider the Offset Quadrature Amplitude Modulation (OQAM) FBMC, which is currently being considered for numerous applications beyond 5/6G. These include visible light communication (VLC), power line communication (PLC), or even the Internet of Things (IoT). FBMC-OQAM has two distinctive design concepts for signal modulation and demodulation: PolyPhase networks (PPN) and frequency spreading (FS). In general, PPN structures are preferred at the transmitter side due to their low implementation complexity. On the other hand, FS is preferred in receivers as it has better equalization performance in multipath fading channels.

Numerous approaches have addressed the efficient implementation of FBMC transmitters, a straightforward solution employing an enlarged IFFT with Frequency Spreading (FS), which uses frequency-domain construction of the symbols. A significant complexity reduction can be achieved by using two IFFTs and two polyphase filter structures. Further reduction can be achieved by applying minimal additional signal processing to enable the use of only a single IFFT. Other design proposals also exist for reducing the complexity of an FBMC transmitter, where the number of operations is reduced, but that requires modifications to existing hardware blocks, e.g., the IFFT.

Enhanced Receiver Designs

Our newest paper deals with some of these problems, focusing mainly on the receiver side. Our intention is to introduce out-of-the-box ideas, proposing alternative signal processing solutions rather than conventional solutions. Our suggestion is the inclusion of two improved receiver structures for the PPN-based FBMC receivers. These improved structures reduce receiver complexity to almost half that of conventional PPN receivers, taking advantage of real-valued signal processing.

Sliding Window (SW) equalizer technique

We also analyze and compare their calculation complexity in terms of the number of multiplications and additions. Additionally, we are investigating the Sliding Window (SW) equalizer technique to enable the implementation of the proposed structures in multipath environments. This technique compensates for a radio transmission channel’s effects on the signal received, enabling the receiver to retrieve the transmitted digital data stream.

Furthermore, we are also proponents of two modifications to the SW equalization method. The first one reduces the complexity of the conventional method by employing the Hopping Discrete Fourier Transform (HDFT). The second proposed solution aims to improve the performance of SW equalizers. The approach involves a window function that is applied to the observation window before the IFFT block. This window function must fulfill the constant overlap-add (COLA) property consistently so a perfect signal reconstruction can be achieved via this compensation method.

Observation window samples are multiplied by the window function before applying FFT, following the application of IFFT channel equalization. As a final step, instead of taking only the center block, the entire IFFT output is considered and added to the equalized time-domain signal stream in an overlapping manner. This way, the signal will be equalized in a much smoother way by suppressing the discontinuities between the equalized blocks.

Dive Deeper into Research

Read the full research paper on our newest solution for improving the signal processing of FBMC receivers. The paper published in the Physical Communication Journal is open-access and can be downloaded here.

If you are interested in the implementation of general FBMC transmitter architectures, you can also read our previous paper published in the Radioengineering Journal. The complex requirements of FBMC transmitters are just one of the key research fields. In this paper, various FBMC implementations are compared in terms of complexity and quantization error. An alternative design approach is suggested: the two full-size IFFTs in the standard PP can be replaced by two half-size IFFTs, taking advantage of real-valued data processing. It has been shown that the complexity of the design will be reduced by almost half. Furthermore, among those transmitter architectures evaluated, the proposed alternative method has the lowest quantization error, which is a key issue for low-precision arithmetic hardware.

If you are new to FBMC and OFDM, try out the example code in 5G Toolbox. Through this sample code, you can easily grasp the idea behind such modulation techniques and get a feel for the system performance and characteristics of the signals.

Learn more

SciEngineer’ team can help you tackle your complex engineering projects.

Consulting

Through our various Consulting Services, our experts will guide your team through industry-accepted best practices to improve application and model quality, manage increasing complexity, shorten the time-to-market cycle, and reduce the cost of implementation and maintenance.

Training

Our training courses are designed to help organizations and individuals close skills gaps, keep up to date with industry-accepted best practices, and achieve the greatest value from MATLAB and Simulink.